API 5L X52 PSL2 PIPE

API 5L X52 PSL2 Pipe

API 5L X52 PSL2 Pipes are broadly utilized for pipeline transportation systems in the petroleum, gas, water, and natural gas industries. These API 5l X52 PSL2 Pipes specifications adhere to the International Organization for Standardization, which standardizes pipeline transportation systems.

REXAL TUBES INDIA IS A LEADING MANUFACTURER, SUPPLIER AND EXPORTER OF API 5L X52 PSL2 Pipe

API 5L X52 PSL2 Pipe is considered the best and widely used steel product. This grade of pipes is known as best as they possess high strength, corrosion resistance, and durability.

The API 5L X52 PSL2 one of the specifications and grades of pipes used for the transportation of fluids over long distances. There are different product specification levels and they correspond to different application requirements. API 5L X52 PSL2 Pipes are individually covered so that the premium quality of the material is retained and there are no damages in the last stages of production.

API 5L X52 PSL2 Pipe comes with imprints relevant to the job information (for example heat number, size, material, and part number). This information is also printed along all to whom API 5L X52 PSL2 Pipe is delivered.

Your need for API 5L X52 PSL2 Pipe of standard length and diameter pipes and tubing ends here. If you need high strength, high tensile, heavy wall line pipe requirements for deep sour wells, drilling, offshore drilling and production, arctic exploration and production, or you need API 5L X52 PSL2 Pipe for natural gas, oil, or water transport, then Rexal Tubes India can meet the demands of your company.

Our API 5L X52 PSL 2 Seamless Line Pipes are enhanced with added chemical and mechanical properties that make them anti-corrosive, high pressure resistant, and suitable for both onshore and offshore practices.

API 5L X52 PSL2 Pipe Grade, Chemical Composition and Mechanical Requirements

X

The x symbol followed by a two or three digit number equal to the specified minimum yields strength in 1000 psi rounded down to the nearest integer.

Minimum Yield

At pipe body 360 MPa (52,200-76,900 psi)

Delivery Condition

+N Normalizing rollingQ Quenched and tempered where +Q refers to a heat treatment process consisting of quench
hardening followed by tempering

PSL

PSL refers to product specification level, where PSL 2 provides a more extensive chemical composition complete with a mandatory minimum fracture toughness.

Applicable codes and standards API 5L, 45th Edition / ISO 3183 Specification for line pipe – technical delivery conditions.

Size: ¼” to 36”
Wall Thickness: SCH 10 to 160, STD, XS, XXS
Length: up to 12 Meters

*Additional testing requirements met*: NACE MR
0175,NACE TM0177,NACE TM0284,HIC TEST, SSC TEST, H2 SERVICE,IBR, ECT in all
the products.

Fill the Below Detail

    CHEMICAL COMPOSITION
    C Si MN P S V Nb Ti Other Carbon Equivalent
    Max (b) Max Max (b) Max Max Max Max Max % maximum
    CE(IIW) CE(Pcm)
    0.22 0.45 1.40/ 0.025 0.015 (d) (d) (d) (g) 0.43 0.25
    MECHANICAL REQUIREMENT
    Tensile Requirements on Pipe body of welded pipes Ratio Elongation CVN Absorbed Energy Heat Treatment
    Yield Strength (R10.5) Tensile Strength (R) R 10.5/ R % 0 degree celsius
    PSI Mpa PSI Mpa Max Minimum Min J Min ft. lb Wield Seam & HAZ Normalizing
    52,200-76,900 360-530 66,700-110,200 460-760 0.93

    IMPACT TEST

    AVG ABSORBED ENERGY IND. ABSORBED ENERGY
    MIN (JOULES) MIN (JOULES)
    27 20

    Notes:

    1. 0.50% maximum for copper; 0.50% maximum for nickel; 0.50% maximum for chromium and 0.15% maximum for molybdenum. For grades up to and including X52, Cu, Cr and Ni shall not be added intentionally.
    2. For each reduction of 0.01% below the specified maximum concentration for carbon, an increase of 0.05% above the specified maximum concentration for manganese in permissible, up to a maximum of 1.65% for grades ≥ B, but ≤ X52; up to a maximum of 1.75% for grades > X52, but
    3. Unless otherwise agreed, the sum of the niobium and vanadium contents shall be ≤ 0.06%.
    4. The sum of the niobium, vanadium and titanium concentrations shall be ≤ 0.15%
    5. Unless otherwise agreed.
    6. Unless otherwise agreed, the sum of the niobium, vanadium and titanium concentrations shall be ≤ 0.15
    7. Unless otherwise agreed, 0.50% maximum for copper; 0.50% maximum for nickel; 0.50% maximum for chromium and 0.15% maximum for molybdenum.
    8. Unless otherwise agreed, the sum of the niobium, vanadium and titanium concentrations shall be ≤ 0.15%
    9. Unless otherwise agreed, 0.50% maximum for copper; 0.50% maximum for nickel; 0.50% maximum for chromium and 0.15% maximum for molybdenum.

    Other Details

    Surface

    1. All surfaces have been 100% visually inspected. The surface condition complies with API 5L standards.
    2. External surface of pipe shall be coated with a layer of varnish.

    NDT

    All pipes will be ultrasonic tested on pipe body and pipe end as per API 5L standards:

    1. longitudinal: 100% of the pipe surface
    2. pipe ends not scanned by the automatic ultrasonic system shall be inspected by manual UT or Magnetic Particle Examination.

    Certification and Traceability

    All dimensions will be supplied with a 3.2 certificate according to EN 10204, endorsed by recognized and independent inspection agency. Marking shall be in SI units (X52) accordance with API requirements & mill standard.

    Dimensional Control

    All dimensions will be supplied according to API 5L clause 9.11; In addition, the following tolerances apply:

    1. Pipe body: +/- 0,75%
    2. Pipe end: +/- 0,5%
    3. Wall thickness: +15%, -12,5%
    4. Length: -0 / +100mm

    Pipe Ends

    Pipe Ends are bevelled. End angle shall be 30°- 0°/+5°, root face shall be 1.6mm +/- 0.8mm and fitted with bevel protectors.

    Protection

    Pipes are varnished on the outside.

    Available Stock at Rexal Tubes India

    Our main markets for selling are

    We also supply

    API 5L other PRODUCTS

    Carbon Steel Seamless Pipes

    PSL2

    API 5L Pipe
    API 5L Line Pipe
    API 5L Supplier
    API 5L Pipe Price

    Know More

    Carbon Steel Seamless Pipes

    Seamless

    API 5L Pipe
    API 5L Line Pipe
    API 5L Supplier
    API 5L Pipe Price

    Know More

    Carbon Steel Seamless Pipes

    LSAW

    API 5L Pipe
    API 5L Line Pipe
    API 5L Supplier
    API 5L Pipe Price

    Know More

    Carbon Steel Seamless Pipes

    DSAW

    API 5L Pipe
    API 5L Line Pipe
    API 5L Supplier
    API 5L Pipe Price

    Know More

    Related products

    Sleeves

    sleeves

    The sleeve portion of the pipe sleeve consists of a body portion and a third flange that elongates from the body portion…..
    Know More

    Carbon Steel Fittings

    Carbon Steel Seamless Pipes

    The benefits of alloy steel pipe include its tensile strength, yield strength, fatigue resistance,
    Know More

    Carbon Steel Flanges

    Carbon Steel Seamless Pipes

    Rexal Tubes India Supply has an extensive selection of pipe fittings and flanges to fully complement our
    Know More

    Pipes

    Carbon Steel Seamless Pipes

    Rexal Tubes India Supply has an extensive selection of pipe fittings and flanges to fully complement our
    Know More

    Popular Product Searches on Rexal Tubes India:

    API 5L PSL2 Pipes: X42 PSL2 Pipes | X46 PSL2 Pipes | X52 PSL2 Pipes | X56 PSL2 Pipes | X60 PSL2 Pipes | X65 PSL2 Pipes | X70 PSL2 Pipes | X80 PSL2 LSAW Steel Pipes | X80 PSL2 Seamless Pipes | X100 PSL2 Pipes | X120 PSL2 Pipes.

    API 5L Seamless Pipes: Gr.B PSL1 Seamless Pipe | Gr.B PSL2 Seamless Pipe | X42 PSL1 Seamless Pipes | X42 PSL2 Seamless Pipes | X46 PSL1 Seamless Pipes | X46 PSL2 Seamless Pipes | X52 PSL1 Seamless Pipes | X52 PSL2 Seamless Pipes | X56 PSL1 Seamless Pipes | X56 PSL2 Seamless Pipes | X60 PSL1 Seamless Pipes | X60 PSL2 Seamless Pipes | X65 PSL1 Seamless Pipes | X65 PSL2 Seamless Pipes | API5L X70 PSL1 Seamless Pipes | X70 PSL2 Seamless Pipes | X100 Seamless Pipes | X120 Seamless Pipe.

    API 5L DSAW Line Pipes: X42 PSL1 DSAW Pipes | X42 PSL2 DSAW Pipes | X46 PSL1 DSAW Pipes | X46 PSL2 DSAW Pipes | X52 PSL1 DSAW Pipes | X52 PSL2 DSAW Pipes | X56 PSL1 DSAW Pipes | X56 PSL2 DSAW Pipes | X60 PSL1 DSAW Pipes | X60 PSL2 DSAW Pipes | X65 PSL1 DSAW Pipes | X65 PSL2 DSAW Pipes | X70 PSL1 DSAW Pipes | X70 PSL2 DSAW Pipes | X80 DSAW Steel Pipes | X80 Seamless Steel Pipes | X100 DSAW Pipes | X120 DSAW Pipe.

    API 5L LSAW Line Pipes: X42 PSL1 LSAW Pipes | X42 PSL2 LSAW Pipes | X46 PSL1 LSAW Pipes | X46 PSL2 LSAW Pipes | X52 PSL1 LSAW Pipes | X52 PSL2 LSAW Pipes | X56 PSL1 LSAW Pipes | X56 PSL2 LSAW Pipes | X60 PSL1 LSAW Pipes | X60 PSL2 LSAW Pipes | X65 PSL1 LSAW Pipes | X65 PSL2 LSAW Pipes | X70 PSL1 LSAW Pipes | X70 PSL2 LSAW Pipes