EN 10210-1 Grade S420NH Pipes

EN 10210-1 Grade S420NH Pipes

EN 10210-1 GRADE S420NH PIPES SPECIFICATION

EN 10210-1 Grade S420NH Pipes and Tubes are mild steel pipes and tubes which are low-cost low carbon steel pipes with a maximum of 022 % carbon content with a combination of 100-170 % manganese easy to form and shape. These pipes are manufactured as per EN Specification and are commercially known as CS pipes or MS pipes.

Fill the Below Detail

Rexal Tubes India is the Leading Stockist, Supplier, and Exporter of EN 10210-1 Grade S420NH Pipes

EN 10210-1 Grade S420NH Pipes Properties

Chemical Properties

Carbon Silicon Manganese Phosphorous Sulphur Molybdenum Nickel Chromium Copper Others
max 0.22 max 0.60 1.00-1.70 0.035 0.03 max 0.10 max 0.80 max 0.30 max 0.70 V max 0.05 Al min 0.020 Nb max 0.05 Ti max 0.03

Mechanical Properties

Yield Strength Tensile Strength Elongation A5 min
MPa min ksi min MPa min MPa min ksi min Percentage
520 680 19

Equivalent Designation

DIN EN BS NFA ASTM ASME
EN 10210-1 Grade S420NH

Dimensional Tolerances of EN 10210-1 Grade S420NH

OD/Wall tolerance

Outer diameter and wall Thickness
Execution Size Range OD Tolerance Wall tolerance
Hot-rolled Tube OD – 80 mmOD; 80 mmWall ± 0.4 mm± 0.5 % of OD ± 0.7 mm± (5 % x wallthickness + 0.1 mm
Hot-rolled peeled tube All sizesWall + 0.25/- 0 mm ± 0.8 mm± (5 % x wall thickness+ 0.2 mm)
Cold Worked tubecold-rolled or cold-drawn OD 80 Wall Thickness 8 + 0.30/- 0 mm*+ 0.35/- 0 mm*+ 0.40/- 0 mm* ± 0.30 mm± 0.35 mm± 0.40 mm

Straightness
The maximum deviation from the straight line is 1 mm on a gauge length of 1000 mm.

Ovality
The maximum out-of-roundness is 65% of the total outer diameter tolerance.

Standard length tolerances

Component length (mm) OD 30-100 mm OD 100-254 mm
10-100 + 1.0/- 0 + 2.0/- 0
100-600 + 2.0/- 0 + 3.0/- 0
600-1200 + 3.0/- 0 + 4.0/- 0
1200-5000 + 5.0/- 0 + 6.0/- 0

Delivery Executions of EN 10210-1 Grade S420NH

Tube Ends

All tubes are provided with spotless, square cut ends.Chamfering can be done on demand.

Tube surface

Tubes are supplied without anti-corrosive treatment, but anti-corrosive treatment is available and can be done on request.

Protection

  • Black and Bare
  • External Varnished with Black or Clear LAcquer

Mill test certificate

  • MTC is issued in accordance with EN 10204.

Packaging

Tubes are packaged as standard, with steel straps into hexagonal bundles with one end flush. Tubes can also be bundled in multiples. Bundle weights are adjusted as requested by the customer. Each package contains tubes from a single cast/heat only.

Marking

Every tube is set apart with tube type, heat number, steel grade and size. Information is repeated along the whole length of the tube. Bundles are also labeled with a tag having information in both alphanumeric and by bar code.

Labelling

Material conveyed directly from our plant is labeled in accordance with automotive standard, ie with both alphanumeric and bar code information. Client particular information can be included on demand. .

EN 10210-1 Grade S420NH Carbon Steel Seamless Pipes and Tubes
EN 10210-1 Grade S420NH Carbon Steel Seamless Pipes and Tubes are EN specification Pipes and Tubes used for structural applications.Trio steel is oee of the leading stockist of EN 10210-1 Pipes and Tubes In India , Singapore and many countries.


Brand: Rexal Tubes India
Manufacturer: MSL, ISMT, JSL, JINDAL, TATA STEEL,
Model: Carbon Steel Pipes and Tubes

EN 10210-1 Grade S420NH European standard covers specialized conveyance conditions for hot formed or annealed hollow sections from construction steel. Pipe will be supplied in 5-7 metre arbitrary lengths with butt-weld ends and varnished to stay away from  oxidation of the steel when in storage. All pipes are fully certified and traceable with heat numbers hard stamped onto each random length. Rexal Tubes India can supply cut lengths; long pieces and even bore from forged, machined bar to fulfill your urgent demand.
Rexal Tubes India is considered as the most Reliable EN 10210-1 Grade S420NH Pipes and Tubes Supplier from India.

EN 10210-1 Grade S420NH Carbon Steel Seamless Pipes and Tubes are certified with Mill test Certificate in accordance with En 10204 Type 3.1/3.2. Where 3.2 indicates In-stage inspection by independent inspection agencies like TUV, DNV, BVQS, LLOYDS & EIL.

IBR, NACE MR 0175,NACE MR 0103, HIC, IGC, IMPACT are adhered as supplementary testing requirements for EN 10210-1 Grade 420NH which can be fulfilled with a government approved NABL laboratory.

EN 10210-1 Grade S420NH Pipes and Tubes are supplied in varnished condition in order to prevent formation of rust.

EN 10210-1 Grade S420NH Pipes and Tubes are generally used  for automobile sectors, interior & exterior architectural structures, water pipe lines, Gas lines, Oil & Gas industries etc.

Rexal Tubes India is India’s leading carbon steel pipe stock and alloy steel pipe stockist , supplier and Exporter specialized in delivering consignments on time by means of Express Courier Services DHL, FedEx, UPS, TNT, etc. to the remote locations.

Available Stock at Rexal Tubes India

Our main markets for selling are

We also supply

Related products

Sleeves

sleeves

The sleeve portion of the pipe sleeve consists of a body portion and a third flange that elongates from the body portion…..
Know More

Carbon Steel Fittings

Carbon Steel Seamless Pipes

The benefits of alloy steel pipe include its tensile strength, yield strength, fatigue resistance,
Know More

Carbon Steel Flanges

Carbon Steel Seamless Pipes

Rexal Tubes India Supply has an extensive selection of pipe fittings and flanges to fully complement our
Know More

Pipes

Carbon Steel Seamless Pipes

Rexal Tubes India Supply has an extensive selection of pipe fittings and flanges to fully complement our
Know More