ASTM A333 Grade 6 Pipes

ASTM A333 is the standard designation for seamless and welded steel pipe for application in low-temperature accommodations and other applications with the required notch toughness.
Generally, steel cannot withstand low-temperature settings, which is a primary reason for the material’s failure. At lower temperatures, the material is susceptible to losing its dimensional stability, solely because it contracts. The contraction at lower temperatures causes a reduction in the thickness of the ASTM A333 Grade 6 Pipes, while additionally minimizing its inner diameter.
Preheating of the ASTM A333 Grade 6 Pipes is not recommended and no post-weld heat treatment of the components is compulsory. If multi-pass welding is performed in ASTM A333 Grade 6 Pipes, it is consequential to sanction the weld to cool below 300 Degree F (150 Degree C) afore perpetuating.

ASTM A333 Grade 6 Pipes

Under no circumstances should hydrogen be integrated into the shielding gas to make ASTM A333 Grade 6 Carbon Steel EFW Pipes eschew the jeopardy of gelid cracking in the weld zone.
The carbon predicated ASTM A333 Grade 6 Round Pipe can be manufactured by either a seamless or welding process without any additament of filler metal to be utilized in the welding operation. According to the designation, all A333 seamless pipe and welded pipes are required to be treated to control their microstructure.

Fill the Below Detail

ASTM A333 Grade 6 Pipes Specification:

Sizes (Seamless): 1/2″ NB – 60″ NB
Sizes (ERW): 1/2″ NB – 24″ NB
Sizes (SAW): 16″ NB – 100″ NB
Schedule 20 – Schedule XXS (heavier on request) up to 250 mm thick.
NPS 1-1/2″ and under may be either hot-finished or cold drawn. NPS 2″ and larger shall be hot finished unless otherwise specified.

ASTM A333 Grade 6 Pipes Chemical Properties:

Grade C, Max Mn P, Max S, Max Si, Min Cr, Max Cu, Max Mo, Max Ni, Max V, Max
Grade 6 0.30 0.29-1.30 0.025 0.025 0.45 0.30 0.40 0.12 0.40

ASTM A333 Grade 6 Pipes Mechanical Properties:

Grade 6
Tensile Strength, min., psi, (MPa) (415)
Yield Strength, min., psi, (MPa) (240)

Available Stock at Rexal Tubes India

Our main markets for selling are

We also supply