API 5L X80 PSL1 Seamless Steel Pipe Manufacturers

API 5L X80 PSL1 Seamless Steel Pipe

This API 5L X80 PSL1 Seamless Steel Pipe is meant to be used for pipeline transportation systems. Typically, the API 5L X80 PSL1 Seamless Steel Pipe is used in industries such as petroleum and natural gas. The application of the API 5L X80 Seamless Pipe is noticed in the conveyance of mediums like gas, water, and oil, as these pipes are well suited in the transportation of these media.

REXAL TUBES INDIA IS A LEADING MANUFACTURER, SUPPLIER AND EXPORTER OF API 5L X80 PSL1 Seamless Steel Pipe

API 5L X80 PSL 1 Seamless Steel Pipes are resistant to seawater and steam at high temperatures as well as to salt and caustic solutions. All API 5L X80 PSL1 Seamless Steel Pipe are individually covered so that the premium quality of the material is retained and there are no damages in the last stages of production.

API 5L X80 PSL1 Seamless Steel Pipe comes with imprints relevant to the job information (for example heat number, size, material, and part number). This information is also printed along all to whom API 5L X80 PSL1 Seamless Steel Pipe is delivered.

Your need for API 5L X80 PSL1 Seamless Steel Pipe of standard length and diameter pipes and tubing ends here. If you need high strength, high tensile, heavy wall line pipe requirements for deep sour wells, drilling, offshore drilling and production, arctic exploration and production, or you need API 5L X80 PSL1 pipe for natural gas, oil or water transport, then Rexal Tubes India can meet the demands of your company.

API 5L X80 PSL1 Seamless Steel Pipe (enhanced) is a high yield seamless pipe that is modified to suit offshore structural purposes. It is intended for (but not limited to) use in fixed offshore structures and is designed to operate in the offshore sector.

API 5L X80 PSL1 Seamless Steel Pipe Grade, Chemical Composition and Mechanical Requirements

X

The x symbol followed by a two or three digit number equal to the specified minimum yields strength in 1000 psi rounded down to the nearest integer.

Minimum Yield

At pipe body 551 MPa (80,000 psi)

Delivery Condition

+N Normalizing rollingQ Quenched and tempered where +Q refers to a heat treatment process consisting of quench
hardening followed by tempering

PSL

PSL refers to product specification level, where PSL 1 mentions the minimum mechancial requirement

Nominal Pipe Size for

API 5L X80 PSL1 Seamless Steel Pipe : 2″ to 28″ O.D.
Wall Thickness – Schedule 10 through 160, STD, XS, XXS

Fill the Below Detail

Chemical Properties of API 5L X80 PSL1 Seamless Steel Pipes
Mass fraction, based upon heat and product analysis a
C	Si	Mn	P	S	V	Nb	Ti	Other
max.b	max	max.b	max.	max.	max.	max.	max.
SEAMLESS PIPE – API 5L X80 PSL1
0.26	–	1.30	0.030	0.030	d	d	d	a

Notes:

0.50% maximum for cooper; 0.50% maximum for nickel; 0.50% maximum for chroium and 0.15% maximum for molybdenum. For grades up to and including XS2, Cu, Cr and Ni shall not be added intentionally.
For esach reduction of 0.01% below the specified maximum concentration of carbon, an increase of 0.05% above the specified maximum concentration for manganese is permissible, up to a maximum of 1.65% for grades>= X52; upto a maximum of 1.75% for grades>X52, but<x70; upto=”” a=”” maximum=”” of=”” 2.00%=”” for=”” grade=”” x70.<=”” li=””></x70;>
Unlcess otherwise agreed, the sum of the niobium and vanadium contents shall be <=0.06%.
The sum of the niboium, vanadium and titanium concentrations shall be <=0.15%.
Unless otherwise agreed.
Unless otherwise agrees, the sum of niboium, vanadium and titanium concentrations shall be <=0.15%.
Unless otherwie agreed, 0.50% maximum ofr copper, 0.30% maximum for nickel, 0.30% maximum for chromiumand 0.15% maximum for molybdenum.
Unless otherwise agreed, the sum of niboium, vanadium and titanium concentrations shall be <=0.15%.
For pipe with diameter<219.10mm(8.625″), the maximum yield strength shall be <=495Mps(71,800 psi).

Mechanical Properties of API 5L X80 PSL1 Seamless Steel Pipes
Y.S	T.S	ELONGATION
Mpa(psi)	Mpa(psi)
min	min	min
551(80 000)	655(95 000)	28%

Note:

0.50% maximum for copper, 0.50% maximum for nickel, 0.50% maximum for chromium, and 0.15% maximum for molybdenum.
For each reduction of 0.01% below the specified maximum concetration for carbon, an increase of 0.05% above the specified maximum concentration for manganese is permissible, up to a maximum of 1.65%
Unless otherwise agreed, the sum of the niobium and vanadium contents shall be ≤0.06%.
The sum of the niobium ,vanadium and titanium concentratons shall be ≤0.06%.
Unless otheriwse agreed.
Unless otherwise agreed, the sum of niobium, vanadium and titanium concentrations shall be ≤ 0.15%

Available Stock at Rexal Tubes India

Our main markets for selling are

We also supply

API 5L other PRODUCTS

Related products

Sleeves

sleeves

The sleeve portion of the pipe sleeve consists of a body portion and a third flange that elongates from the body portion…..
Know More

Carbon Steel Fittings

Carbon Steel Seamless Pipes

The benefits of alloy steel pipe include its tensile strength, yield strength, fatigue resistance,
Know More

Carbon Steel Flanges

Carbon Steel Seamless Pipes

Rexal Tubes India Supply has an extensive selection of pipe fittings and flanges to fully complement our
Know More

Pipes

Carbon Steel Seamless Pipes

Rexal Tubes India Supply has an extensive selection of pipe fittings and flanges to fully complement our
Know More

Popular Product Searches on Rexal Tubes India: