API 5L X70 PSL1 LSAW Pipe

API 5L X70 PSL1 LSAW Pipe

API 5L X70 PSL1 Pipes are broadly utilized for pipeline transportation systems in the petroleum, gas, water, and natural gas industries. These API 5l X70 PSL1 Pipes specifications adhere to the International Organization for Standardization, which standardizes pipeline transportation systems.

REXAL TUBES INDIA IS A LEADING MANUFACTURER, SUPPLIER AND EXPORTER OF API 5L X70 PSL1 LSAW PIPE

API 5L X70 PSL1 LSAW Pipe is considered the best and widely used steel product. This grade of pipes is known as best as they possess high strength, corrosion resistance, and durability. We supply and stock a full range of API 5L X70 PSL1 LSAW pipes. All products we supply are conforming to industry standards or exceeding API, ASTM, ASME, ANSI, and other national and international standards.

API 5L X70 PSL1 LSAW Pipe is individually covered so that the premium quality of the material is retained and there are no damages in the last stages of production.

API 5L X70 PSL1 LSAW Pipe comes with imprints relevant to the job information (for example heat number, size, material, and part number). This information is also printed along all to whom API 5L X70 PSL1 LSAW Pipe is delivered.

Your need for API 5L X70 PSL1 LSAW Pipe of standard length and diameter pipes and tubing ends here. If you need high strength, high tensile, heavy wall line pipe requirements for deep sour wells, drilling, offshore drilling and production, arctic exploration and production, or you need API 5L X70 PSL1 LSAW Pipe for natural gas, oil, or water transport, then Rexal Tubes India can meet the demands of your company.

API 5L X70 PSL1 LSAW Pipe (enhanced) is a high yield seamless pipe that is modified to suit offshore structural purposes. It is intended for (but not limited to) use in fixed offshore structures and is designed to operate in the offshore sector.

API 5l X70 PSL1 LSAW Line Pipe Grade, Chemical Composition and Mechanical Requirements

X

The x symbol followed by a two or three digit number equal to the specified minimum yields strength in 1000 psi rounded down to the nearest integer.

Minimum Yield

At pipe body 485 MPa (70,300 psi)

Delivery Condition

+N Normalizing rollingQ Quenched and tempered where +Q refers to a heat treatment process consisting of quench
hardening followed by tempering

PSL

PSL refers to product specification level, where PSL 1 mentions the minimum mechancial requirement

Applicable codes and standards API 5L, 45th Edition / ISO 3183 Specification for line pipe – technical delivery conditions. 

Size: 16” to 64”
Wall Thickness: 6 MM TO 65 MM
Length: up to 18 Meters

 *Additional testing requirements met*: NACE MR
0175,NACE TM0177,NACE TM0284,HIC TEST, SSC TEST, H2 SERVICE,IBR, ECT in all
the products.

Fill the Below Detail

CHEMICAL COMPOSITION
C Si MN P S V Nb Ti Other Carbon Equivalent
Max (b) Max Max (b) Max Max Max Max Max % maximum
CE(IIW) CE(Pcm)
0.26 (e) 1.65 (e) 0.030/ 0.030/ (f) (f) (f) (a)
MECHANICAL REQUIREMENT
Tensile Requirements on Pipe body of welded pipes Ratio Elongation CVN Absorbed Energy Heat Treatment
Yield Strength (R10.5) Tensile Strength (R) R 10.5/ R % 0 degree celsius
PSI Mpa PSI Mpa Max Minimum Min J Min ft. lb Wield Seam & HAZ Normalizing
70,300 min 485 min 82,700 min 570 min

IMPACT TEST

AVG ABSORBED ENERGY IND. ABSORBED ENERGY
MIN (JOULES) MIN (JOULES)
27 20

Notes:

  1. 0.50% maximum for copper; 0.50% maximum for nickel; 0.50% maximum for chromium and 0.15% maximum for molybdenum. For grades up to and including X52, Cu, Cr and Ni shall not be added intentionally.
  2. For each reduction of 0.01% below the specified maximum concentration for carbon, an increase of 0.05% above the specified maximum concentration for manganese in permissible, up to a maximum of 1.65% for grades ≥ B, but ≤ X52; up to a maximum of 1.75% for grades > X52, but
  3. Unless otherwise agreed, the sum of the niobium and vanadium contents shall be ≤ 0.06%.
  4. The sum of the niobium, vanadium and titanium concentrations shall be ≤ 0.15%
  5. Unless otherwise agreed.
  6. Unless otherwise agreed, the sum of the niobium, vanadium and titanium concentrations shall be ≤ 0.15
  7. Unless otherwise agreed, the sum of the niobium and vanadium contents shall be ≤ 0.06%.
  8. The sum of the niobium, vanadium and titanium concentrations shall be ≤ 0.15%
  9. Unless otherwise agreed.
  10. Unless otherwise agreed, the sum of the niobium, vanadium and titanium concentrations shall be ≤ 0.15%

Other Details

Surface

  1. All surfaces have been 100% visually inspected. The surface condition complies with API 5L standards.
  2. External surface of pipe shall be coated with a layer of varnish.

NDT

All pipes will be ultrasonic tested on pipe body and pipe end as per API 5L standards:

  1. longitudinal: 100% of the pipe surface
  2. pipe ends not scanned by automatic ultrasonic system shall be inspected by manual UT or Magnetic Particle Examination.

Certification and Traceability

All dimensions will be supplied with a 3.2 certificate according to EN 10204, endorsed by recognized and independent inspection agency. Marking shall be in SI units (X70) accordance with API requirements & mill standard.

Dimensional Control

All dimensions will be supplied according to API 5L clause 9.11; In addition, the following tolerances apply:

  1. Pipe body: +/- 0,75%
  2. Pipe end: +/- 0,5%
  3. Wall thickness: +15%, -12,5%
  4. Length: -0 / +100mm

Pipe Ends

Pipe Ends are beveled. End angle shall be 30°- 0°/+5°, root face shall be 1.6mm +/- 0.8mm and fitted with bevel protectors.

Protection

Pipes are varnished on the outside.

Available Stock at Rexal Tubes India

Our main markets for selling are

We also supply

API 5L other PRODUCTS

Carbon Steel Seamless Pipes

PSL2

API 5L Pipe
API 5L Line Pipe
API 5L Supplier
API 5L Pipe Price

Know More

Carbon Steel Seamless Pipes

Seamless

API 5L Pipe
API 5L Line Pipe
API 5L Supplier
API 5L Pipe Price

Know More

Carbon Steel Seamless Pipes

LSAW

API 5L Pipe
API 5L Line Pipe
API 5L Supplier
API 5L Pipe Price

Know More

Carbon Steel Seamless Pipes

DSAW

API 5L Pipe
API 5L Line Pipe
API 5L Supplier
API 5L Pipe Price

Know More

Related products

Sleeves

sleeves

The sleeve portion of the pipe sleeve consists of a body portion and a third flange that elongates from the body portion…..
Know More

Carbon Steel Fittings

Carbon Steel Seamless Pipes

The benefits of alloy steel pipe include its tensile strength, yield strength, fatigue resistance,
Know More

Carbon Steel Flanges

Carbon Steel Seamless Pipes

Rexal Tubes India Supply has an extensive selection of pipe fittings and flanges to fully complement our
Know More

Pipes

Carbon Steel Seamless Pipes

Rexal Tubes India Supply has an extensive selection of pipe fittings and flanges to fully complement our
Know More

Popular Product Searches on Rexal Tubes India:

API 5L PSL2 Pipes: X42 PSL2 Pipes | X46 PSL2 Pipes | X52 PSL2 Pipes | X56 PSL2 Pipes | X60 PSL2 Pipes | X65 PSL2 Pipes | X70 PSL2 Pipes | X80 PSL2 LSAW Steel Pipes | X80 PSL2 Seamless Pipes | X100 PSL2 Pipes | X120 PSL2 Pipes.

API 5L Seamless Pipes: Gr.B PSL1 Seamless Pipe | Gr.B PSL2 Seamless Pipe | X42 PSL1 Seamless Pipes | X42 PSL2 Seamless Pipes | X46 PSL1 Seamless Pipes | X46 PSL2 Seamless Pipes | X52 PSL1 Seamless Pipes | X52 PSL2 Seamless Pipes | X56 PSL1 Seamless Pipes | X56 PSL2 Seamless Pipes | X60 PSL1 Seamless Pipes | X60 PSL2 Seamless Pipes | X65 PSL1 Seamless Pipes | X65 PSL2 Seamless Pipes | API5L X70 PSL1 Seamless Pipes | X70 PSL2 Seamless Pipes | X100 Seamless Pipes | X120 Seamless Pipe.

API 5L DSAW Line Pipes: X42 PSL1 DSAW Pipes | X42 PSL2 DSAW Pipes | X46 PSL1 DSAW Pipes | X46 PSL2 DSAW Pipes | X52 PSL1 DSAW Pipes | X52 PSL2 DSAW Pipes | X56 PSL1 DSAW Pipes | X56 PSL2 DSAW Pipes | X60 PSL1 DSAW Pipes | X60 PSL2 DSAW Pipes | X65 PSL1 DSAW Pipes | X65 PSL2 DSAW Pipes | X70 PSL1 DSAW Pipes | X70 PSL2 DSAW Pipes | X80 DSAW Steel Pipes | X80 Seamless Steel Pipes | X100 DSAW Pipes | X120 DSAW Pipe.

API 5L LSAW Line Pipes: X42 PSL1 LSAW Pipes | X42 PSL2 LSAW Pipes | X46 PSL1 LSAW Pipes | X46 PSL2 LSAW Pipes | X52 PSL1 LSAW Pipes | X52 PSL2 LSAW Pipes | X56 PSL1 LSAW Pipes | X56 PSL2 LSAW Pipes | X60 PSL1 LSAW Pipes | X60 PSL2 LSAW Pipes | X65 PSL1 LSAW Pipes | X65 PSL2 LSAW Pipes | X70 PSL1 LSAW Pipes | X70 PSL2 LSAW Pipes