API 5L X65 PSL2 Seamless Pipe
API 5L X65 PSL2 Seamless Pipes are manufactured as per specifications established by American Petroleum Institute (API). API 5L is a specification of API which defines the standard for the dimension, physical, mechanical and chemical properties of the steel.
REXAL TUBES INDIA IS A LEADING MANUFACTURER, SUPPLIER AND EXPORTER OF API 5L X65 PSL2 SEAMLESS PIPE
API 5L X65 PSL2 Seamless Pipe denotes tubular product fabricated without a welded seam & typically manufactured in a hot composing process by extrusion or drawing which can be followed by cold sizing or finishing to the desired shape, dimensions, and properties.
API 5L X65 PSL2 Seamless Pipe is a carbon steel pipe utilized for the transmission of Petroleum Distillates Oil & Gas. These pipes are available in many forms such as round, square, rectangle, oval, coil, flexible pipe, shaft, ‘U’ Shape, Hydraulic Tube, and many more. All API 5L X65 PSL2 Seamless Pipe is manufactured and tested to the pertinent standards.
We are one of the predominant manufacturers, suppliers, and distributors of a wide range of our API 5L X65 PSL2 Seamless Pipes, which are extensively utilized for construction. API 5L X65 PSL2 Seamless Pipe is individually covered so that the premium quality of the material is retained and there are no damages in the last stages of production.
API 5L X65 PSL2 Seamless Pipe comes with imprints relevant to the job information (for example heat number, size, material, and part number). This information is also printed along all to whom API 5L X65 PSL2 Seamless Pipe is delivered.
Your need for API 5L X65 PSL2 Seamless Pipe of standard length and diameter pipes and tubing ends here. If you need high strength, high tensile, heavy wall line pipe requirements for deep sour wells, drilling, offshore drilling and production, arctic exploration and production, or you need API 5L X65 PSL2 Seamless Pipe for natural gas, oil, or water transport, then Rexal Tubes India can meet the demands of your company.
API 5L X65 PSL2 Seamless Pipe (enhanced) is a high yield seamless pipe that is modified to suit offshore structural purposes. It is intended for (but not limited to) use in fixed offshore structures and is designed to operate in the offshore sector. As the yield strength of the pipe increases, the checking becomes stringent as well.
API 5L Line Round Pipe grades of API pipe exhibit good machinability and also have excellent weld-ability characteristics by addition as well as no addition of filler metals. These API 5L pipes are accurate and available in various sizes and shapes as per the specifications laid by the clients. API 5L X65 PSL2 Seamless Pipe is known to be efficient and cost-saving.
We Rexal Tubes India will provide you Carbon Steel API 5L X65 PSL2 Seamless Pipe which is used in critical engineering applications and also in other applications in the automotive sector. Carbon steel products include steel for LPG cylinders, corrosion-resistant steel, boiler quality, and many more. Whether you need Carbon Steel API 5L X65 PSL2 Seamless Pipe for deep sour wells, drilling, offshore drilling, or for natural gas water transport or oil transport. We Rexal Tubes India can meet the demands of your company.
PSL1 Full Form: PSL refers to Product Specification Levels. PSL-1 and PSL-2 are standards set by the American Petroleum Institute (API).
API 5L X65 PSL2 Seamless Pipe Grade, Chemical Composition and Mechanical Requirements
X
The x symbol followed by a two or three digit number equal to the specified minimum yields strength in 1000 psi rounded down to the nearest integer.
Minimum Yield
At pipe body 450-600MPa (65,300-87,000psi)
Delivery Condition
+N Normalizing rollingQ Quenched and tempered where +Q refers to a heat treatment process consisting of quench
hardening followed by tempering
PSL
PSL refers to the product specification level where PSL2 provides a more extensive chemical composition complete with a mandatory minimum fracture toughness.
Applicable codes and standards API 5L, 45th Edition / ISO 3183 Specification for line pipe – technical delivery conditions.
Size: ¼” to 36”
API 5L x65 Pipe Wall Thickness: SCH 10 to 160, STD, XS, XXS
Length: up to 12 Meters
*Additional testing requirements met*: NACE MR
0175,NACE TM0177,NACE TM0284,HIC TEST, SSC TEST, H2 SERVICE,IBR, ECT in all
the products.
Fill the Below Detail
| CHEMICAL COMPOSITION | ||||||||||
| C | Si | MN | P | S | V | Nb | Ti | Other | Carbon Equivalent | |
| Max (b) | Max | Max (b) | Max | Max | Max | Max | Max | % maximum | ||
| CE(IIW) | CE(Pcm) | |||||||||
| 0.12 (e) | 0.45 (e) | 1.60 (e) | 0.025 | 0.015 | (h) | (h) | (h) | (i) | 0.43 | 0.25 |
| MECHANICAL REQUIREMENT | ||||||||||
| Tensile Requirements on Pipe body of welded pipes | Ratio | Elongation | CVN Absorbed Energy | Heat Treatment | ||||||
| Yield Strength (R10.5) | Tensile Strength (R) | R 10.5/ R | % | 0 degree celsius | ||||||
| PSI | Mpa | PSI | Mpa | Max | Minimum | Min J | Min ft. lb | Wield Seam & HAZ Normalizing | ||
| 65,300-87,000 | 450-600 | 77,600-110,200 | 535-760 | 0.93 | 27 | 20 | ||||
|
IMPACT TEST |
|
| AVG ABSORBED ENERGY | IND. ABSORBED ENERGY |
| MIN (JOULES) | MIN (JOULES) |
| 27 | 20 |
Notes:
- 0.50% maximum for copper; 0.50% maximum for nickel; 0.50% maximum for chromium and 0.15% maximum for molybdenum. For grades up to and including X52, Cu, Cr and Ni shall not be added intentionally.
- For each reduction of 0.01% below the specified maximum concentration for carbon, an increase of 0.05% above the specified maximum concentration for manganese in permissible, up to a maximum of 1.65% for grades ≥ B, but ≤ X52; up to a maximum of 1.75% for grades > X52, but
- Unless otherwise agreed, the sum of the niobium and vanadium contents shall be ≤ 0.06%.
- The sum of the niobium, vanadium and titanium concentrations shall be ≤ 0.15%
- Unless otherwise agreed.
- Unless otherwise agreed, the sum of the niobium, vanadium and titanium concentrations shall be ≤ 0.15
- Unless otherwise agreed, the sum of the niobium and vanadium contents shall be ≤ 0.06%.
- The sum of the niobium, vanadium and titanium concentrations shall be ≤ 0.15%
- Unless otherwise agreed.
- Unless otherwise agreed, the sum of the niobium, vanadium and titanium concentrations shall be ≤ 0.15%
Other Details
Surface
- All surfaces have been 100% visually inspected. The surface condition complies with API 5L standards.
- External surface of pipe shall be coated with a layer of varnish.
NDT
All pipes will be ultrasonic tested on pipe body and pipe end as per API 5L standards:
- longitudinal: 100% of the pipe surface
- pipe ends not scanned by automatic ultrasonic system shall be inspected by manual UT or Magnetic Particle Examination.
Certification and traceability
All dimensions will be supplied with a 3.2 certificate according to EN 10204, endorsed by recognized and independent inspection agency. Marking shall be in SI units (x65) accordance with API requirements & mill standard.
Dimensional control
All dimensions will be supplied according to API 5L clause 9.11; In addition, the following tolerances apply:
- Pipe body: +/- 0,75%
- Pipe end: +/- 0,5%
- Wall thickness: +15%, -12,5%
- Length: -0 / +100mm
Pipe Ends
Pipe Ends are beveled. End angle shall be 30°- 0°/+5°, root face shall be 1.6mm +/- 0.8mm and fitted with bevel protectors.
Protection
Pipes are varnished on the outside.
API 5L other PRODUCTS
Related products
Sleeves
The sleeve portion of the pipe sleeve consists of a body portion and a third flange that elongates from the body portion…..
Know More
Carbon Steel Fittings
The benefits of alloy steel pipe include its tensile strength, yield strength, fatigue resistance,
Know More
Carbon Steel Flanges
Rexal Tubes India Supply has an extensive selection of pipe fittings and flanges to fully complement our
Know More
Pipes
Rexal Tubes India Supply has an extensive selection of pipe fittings and flanges to fully complement our
Know More
Popular Product Searches on Rexal Tubes India:
API 5L PSL2 Pipes: X42 PSL2 Pipes | X46 PSL2 Pipes | X52 PSL2 Pipes | X56 PSL2 Pipes | X60 PSL2 Pipes | X65 PSL2 Pipes | X70 PSL2 Pipes | X80 PSL2 LSAW Steel Pipes | X80 PSL2 Seamless Pipes | X100 PSL2 Pipes | X120 PSL2 Pipes.
API 5L Seamless Pipes: Gr.B PSL1 Seamless Pipe | Gr.B PSL2 Seamless Pipe | X42 PSL1 Seamless Pipes | X42 PSL2 Seamless Pipes | X46 PSL1 Seamless Pipes | X46 PSL2 Seamless Pipes | X52 PSL1 Seamless Pipes | X52 PSL2 Seamless Pipes | X56 PSL1 Seamless Pipes | X56 PSL2 Seamless Pipes | X60 PSL1 Seamless Pipes | X60 PSL2 Seamless Pipes | X65 PSL1 Seamless Pipes | X65 PSL2 Seamless Pipes | API5L X70 PSL1 Seamless Pipes | X70 PSL2 Seamless Pipes | X100 Seamless Pipes | X120 Seamless Pipe.
API 5L DSAW Line Pipes: X42 PSL1 DSAW Pipes | X42 PSL2 DSAW Pipes | X46 PSL1 DSAW Pipes | X46 PSL2 DSAW Pipes | X52 PSL1 DSAW Pipes | X52 PSL2 DSAW Pipes | X56 PSL1 DSAW Pipes | X56 PSL2 DSAW Pipes | X60 PSL1 DSAW Pipes | X60 PSL2 DSAW Pipes | X65 PSL1 DSAW Pipes | X65 PSL2 DSAW Pipes | X70 PSL1 DSAW Pipes | X70 PSL2 DSAW Pipes | X80 DSAW Steel Pipes | X80 Seamless Steel Pipes | X100 DSAW Pipes | X120 DSAW Pipe.
API 5L LSAW Line Pipes: X42 PSL1 LSAW Pipes | X42 PSL2 LSAW Pipes | X46 PSL1 LSAW Pipes | X46 PSL2 LSAW Pipes | X52 PSL1 LSAW Pipes | X52 PSL2 LSAW Pipes | X56 PSL1 LSAW Pipes | X56 PSL2 LSAW Pipes | X60 PSL1 LSAW Pipes | X60 PSL2 LSAW Pipes | X65 PSL1 LSAW Pipes | X65 PSL2 LSAW Pipes | X70 PSL1 LSAW Pipes | X70 PSL2 LSAW Pipes