API 5L PSL1 Pipe
The American Petroleum Institute specification API 5L PSL1 Pipe is mostly used for the transportation of natural gas and petroleum. These API 5L PSL1 Pipes are both seamless and welded. Their main purpose is the transportation of water, oil and gas from one location to another. The capability of the manufacturer ascertains the size of the pipe.
REXAL TUBES INDIA IS A LEADING MANUFACTURER, SUPPLIER AND EXPORTER OF API 5L PSL1 PIPE
An API 5L PSL1 Pipe is manufactured by adhering to the specifications laid down by the International Organization for Standardization (ISO) 3183. It standardizes the criteria for the materials, equipment and offshore structures for petrochemical, petroleum and natural gas industries. PSL 1 and PSL 2 are the two Product Specification Levels that have been recognized by the technical committee. PSL 1 includes pipes that are made of a standard quality whereas PSL 2 pipes have additional chemical & mechanical properties and their testing requirements also differ.
Under this specification, the grades covered are A25, A, B. The following “X” grades are also covered: X42, X46, X52, X56, X60, X65, X70, X80. The two digits following “X” signify the Minimum Yield Strength of the pipe that has been produced in this grade.
We, at Trio Steel, stock the complete range of pipes in both PSL1 and PSL2 in seamless.
The example of API 5L PSL 1 Line pipe is mentioned below:
Size: ¼†to 36â€
Wall Thickness: SCH 10 to 160, STD, XS, XXS
Length: up to 12 Meters
Standard: API 5L
Product Specification Level: PSL 1
Steel Grade: B
Fill the Below Detail
CHEMICAL COMPOSITION | ||||||||||
C | Si | MN | P | S | V | Nb | Ti | Other | Carbon Equivalent | |
Max (b) | Max | Max (b) | Max | Max | Max | Max | Max | % maximum | ||
CE(IIW) | CE(Pcm) | |||||||||
0.26 | – | 1.20 | 0.030 | 0.030 | (c),(d) | (c),(d) | (d) | (a) | – | – |
MECHANICAL REQUIREMENT | ||||||||
Tensile Requirements on Pipe body of welded pipes | Ratio | Elongation | CVN Absorbed Energy | Heat Treatment | ||||
Yield Strength (R10.5) | Tensile Strength (R) | R 10.5/ R | % | 0 degree celsius | ||||
PSI | Mpa | PSI | Mpa | Max | Minimum | Min J | Min ft. lb | Wield Seam Normalizing |
35,500 min | 245 min | 60,200 min | 415 min | – | – | – | ||
IMPACT TEST |
|
AVG ABSORBED ENERGY | IND. ABSORBED ENERGY |
MIN (JOULES) | MIN (JOULES) |
27 | 20 |
Notes:
- 0.50% maximum for copper; 0.50% maximum for nickel; 0.50% maximum for chromium and 0.15% maximum for molybdenum. For grades up to and including X52, Cu, Cr and Ni shall not be added intentionally.
- For each reduction of 0.01% below the specified maximum concentration for carbon, an increase of 0.05% above the specified maximum concentration for manganese in permissible, up to a maximum of 1.65% for grades ≥ B, but ≤ X52; up to a maximum of 1.75% for grades > X52, but
- Unless otherwise agreed, the sum of the niobium and vanadium contents shall be ≤ 0.06%.
- The sum of the niobium, vanadium and titanium concentrations shall be ≤ 0.15%
- Unless otherwise agreed.
- Unless otherwise agreed, the sum of the niobium, vanadium and titanium concentrations shall be ≤ 0.15%
- Unless otherwise agreed, 0.50% maximum for copper; 0.50% maximum for nickel; 0.50% maximum for chromium and 0.15% maximum for molybdenum.
- Unless otherwise agreed, the sum of the niobium, vanadium and titanium concentrations shall be ≤ 0.15%
- Unless otherwise agreed, 0.50% maximum for copper; 0.50% maximum for nickel; 0.50% maximum for chromium and 0.15% maximum for molybdenum.
Other Details
Surface
- All surfaces have been 100% visually inspected. The surface condition complies with API 5L standards.
- External surface of pipe shall be coated with a layer of varnish.
NDT
All pipes will be ultrasonic tested on pipe body and pipe end as per API 5L standards:
- longitudinal: 100% of the pipe surface
- pipe ends not scanned by automatic ultrasonic system shall be inspected by manual UT or Magnetic Particle Examination.
Certification and Traceability
All dimensions will be supplied with a 3.2 certificate according to EN 10204, endorsed by recognized and independent inspection agency. Marking shall be in SI units (B) accordance with API requirements & mill standard.
Dimensional Control
All dimensions will be supplied according to API 5L clause 9.11; In addition, the following tolerances apply:
- Pipe body: +/- 0,75%
- Pipe end: +/- 0,5%
- Wall thickness: +15%, -12,5%
- Length: -0 / +100mm
Pipe Ends
Pipe Ends are beveled. End angle shall be 30°- 0°/+5°, root face shall be 1.6mm +/- 0.8mm and fitted with bevel protectors.
Protection
Pipes are varnished on the outside.
API 5L other PRODUCTS
Related products
Popular Product Searches on Rexal Tubes India:
API 5L PSL2 Pipes: X42 PSL2 Pipes | X46 PSL2 Pipes | X52 PSL2 Pipes | X56 PSL2 Pipes | X60 PSL2 Pipes | X65 PSL2 Pipes | X70 PSL2 Pipes | X80 PSL2 LSAW Steel Pipes | X80 PSL2 Seamless Pipes | X100 PSL2 Pipes | X120 PSL2 Pipes.
API 5L Seamless Pipes: Gr.B PSL1 Seamless Pipe | Gr.B PSL2 Seamless Pipe | X42 PSL1 Seamless Pipes | X42 PSL2 Seamless Pipes | X46 PSL1 Seamless Pipes | X46 PSL2 Seamless Pipes | X52 PSL1 Seamless Pipes | X52 PSL2 Seamless Pipes | X56 PSL1 Seamless Pipes | X56 PSL2 Seamless Pipes | X60 PSL1 Seamless Pipes | X60 PSL2 Seamless Pipes | X65 PSL1 Seamless Pipes | X65 PSL2 Seamless Pipes | API5L X70 PSL1 Seamless Pipes | X70 PSL2 Seamless Pipes | X100 Seamless Pipes | X120 Seamless Pipe.
API 5L DSAW Line Pipes: X42 PSL1 DSAW Pipes | X42 PSL2 DSAW Pipes | X46 PSL1 DSAW Pipes | X46 PSL2 DSAW Pipes | X52 PSL1 DSAW Pipes | X52 PSL2 DSAW Pipes | X56 PSL1 DSAW Pipes | X56 PSL2 DSAW Pipes | X60 PSL1 DSAW Pipes | X60 PSL2 DSAW Pipes | X65 PSL1 DSAW Pipes | X65 PSL2 DSAW Pipes | X70 PSL1 DSAW Pipes | X70 PSL2 DSAW Pipes | X80 DSAW Steel Pipes | X80 Seamless Steel Pipes | X100 DSAW Pipes | X120 DSAW Pipe.
API 5L LSAW Line Pipes: X42 PSL1 LSAW Pipes | X42 PSL2 LSAW Pipes | X46 PSL1 LSAW Pipes | X46 PSL2 LSAW Pipes | X52 PSL1 LSAW Pipes | X52 PSL2 LSAW Pipes | X56 PSL1 LSAW Pipes | X56 PSL2 LSAW Pipes | X60 PSL1 LSAW Pipes | X60 PSL2 LSAW Pipes | X65 PSL1 LSAW Pipes | X65 PSL2 LSAW Pipes | X70 PSL1 LSAW Pipes | X70 PSL2 LSAW Pipes