API 5L X80 LSAW Steel Pipes
API 5L X80 LSAW Steel Pipe is implied to be utilized for pipeline conveyance systems. Typically, the API 5L X80 LSAW Steel Pipe is utilized in the petroleum and natural gas industries. The application of the API 5L X80 LSAW Steel Pipe is observed in the transportation of mediums like gas, water, and oil, as these pipes are appropriate in the conveyance of these media. Size range of the API 5L X80 Welded Pipe, production, is inhibited only to the capabilities of the manufacturer.
REXAL TUBES INDIA IS A LEADING MANUFACTURER, SUPPLIER AND EXPORTER OF API 5L X80 LSAW Steel Pipes.
API 5L X80 PSL1 LSAW steel pipe of American Petroleum Institute specification covers seamless and welded steel line pipe. The technical committee authoring the standards is a standard quality for line pipe where PSL 1 contains additional chemical, mechanical properties, and testing requirements. All API 5L X80 LSAW Steel Pipes are exclusively covered with the goal that the superior nature of the material is held and there are no harms in the last phases of creation.
API 5L X80 LSAW Steel Pipes accompanies engraves applicable to the work data (for instance heat number, size, material, and part number). This information is also printed along all to whom API 5L X80 LSAW Steel Pipes is delivered.
API 5L X80 LSAW Steel Pipes (enhanced) is a high return consistent line that is transmuted to suit seaward primary purposes. It is intended for use in fixed seaward constructions and is intended to work in the offshore sector.
Your requisite for API 5L X80 LSAW Steel Pipes of standard length and distance across lines and tubing close here. If you require high vigor, high pliable, hefty divider line pipe essential for profound acrid wells, penetrating, seaward boring and formation, icy investigation, and formation, or you require API 5L X80 PSL1 pipe for flammable gas, oil, or water convey, at that point, Rexal Tubes India can meet the needs of your company.
Popular Product Searches on Rexal Tubes India:
API 5L Pipes:PSL1 Pipes, PSL2 Pipes,Seamless Pipes,LSAW Pipes,DSAW Pipes.
API5L PSL1 Pipes: API5L X42 PSL1 Pipes, X46 PSL1 Pipes, X52 PSL1 Pipes, X56 PSL1 Pipes, X60 PSL1 Pipes, API5L X65 PSL1 Pipes, X70 PSL1 Pipes, X80 PSL1 LSAW Steel Pipes, X80 PSL1 Seamless Pipes.
API5L PSL2 Pipes: X42 PSL2 Pipes, X46 PSL2 Pipes, X52 PSL2 Pipes, X56 PSL2 Pipes, X60 PSL2 Pipes, X65 PSL2 Pipes, X70 PSL2 Pipes, X80 PSL2 LSAW Steel Pipes, X80 PSL2 Seamless Pipes, X100 PSL2 Pipes, X120 PSL2 Pipes.
API5L Seamless Pipes: Gr.B PSL1 Seamless Pipe, Gr.B PSL2 Seamless Pipe, X42 PSL1 Seamless Pipes, X42 PSL2 Seamless Pipes, X46 PSL1 Seamless Pipes, X46 PSL2 Seamless Pipes, X52 PSL1 Seamless Pipes, X52 PSL2 Seamless Pipes, X56 PSL1 Seamless Pipes, X56 PSL2 Seamless Pipes, X60 PSL1 Seamless Pipes, X60 PSL2 Seamless Pipes, X65 PSL1 Seamless Pipes, X65 PSL2 Seamless Pipes, API5L X70 PSL1 Seamless Pipes, X70 PSL2 Seamless Pipes, X100 Seamless Pipes, X120 Seamless Pipe.
DSAW Line Pipes: X42 PSL1 DSAW Pipes, X42 PSL2 DSAW Pipes, X46 PSL1 DSAW Pipes, X46 PSL2 DSAW Pipes, X52 PSL1 DSAW Pipes, X52 PSL2 DSAW Pipes, X56 PSL1 DSAW Pipes, X56 PSL2 DSAW Pipes, X60 PSL1 DSAW Pipes, X60 PSL2 DSAW Pipes, X65 PSL1 DSAW Pipes, X65 PSL2 DSAW Pipes, X70 PSL1 DSAW Pipes, X70 PSL2 DSAW Pipes, X80 DSAW Steel Pipes, X80 Seamless Steel Pipes, X100 DSAW Pipes, X120 DSAW Pipe.
The x symbol followed by a two or three digit number equal to the specified minimum yields strength in 1000 psi rounded down to the nearest integer.
At pipe body 551 MPa (80,000 psi)
+N Normalizing rollingQ Quenched and tempered where +Q refers to a heat treatment process consisting of quench hardening followed by tempering
PSL refers to product specification level,where PSL 1 mentions the minimum mechancial requirement
Nominal Pipe Size for
API 5L X80 LSAW Steel Pipes : 2″ to 28″ O.D.
Wall Thickness – Schedule 10 through 160, STD, XS, XXS
Fill the Below Detail
Chemical Properties of API 5L X80 LSAW Steel Pipes
|Mass fraction, based upon heat and product analysis a|
|LSAW PIPE – API 5L X80 PSL1|
- 0.50% maximum for cooper; 0.50% maximum for nickel; 0.50% maximum for chroium and 0.15% maximum for molybdenum. For grades up to and including XS2, Cu, Cr and Ni shall not be added intentionally.
- For esach reduction of 0.01% below the specified maximum concentration of carbon, an increase of 0.05% above the specified maximum concentration for manganese is permissible, up to a maximum of 1.65% for grades>= X52; upto a maximum of 1.75% for grades>X52, but<x70; upto=”” a=”” maximum=”” of=”” 2.00%=”” for=”” grade=”” x70.<=”” li=””></x70;>
- Unlcess otherwise agreed, the sum of the niobium and vanadium contents shall be <=0.06%.
- The sum of the niboium, vanadium and titanium concentrations shall be <=0.15%.
- Unless otherwise agreed.
- Unless otherwise agrees, the sum of niboium, vanadium and titanium concentrations shall be <=0.15%.
- Unless otherwie agreed, 0.50% maximum ofr copper, 0.30% maximum for nickel, 0.30% maximum for chromiumand 0.15% maximum for molybdenum.
- Unless otherwise agreed, the sum of niboium, vanadium and titanium concentrations shall be <=0.15%.
- For pipe with diameter<219.10mm(8.625″), the maximum yield strength shall be <=495Mps(71,800 psi).
Mechanical Properties of API 5L X80 LSAW Steel Pipes
|551(80 000)||655(95 000)||28%|
- 0.50% maximum for copper, 0.50% maximum for nickel, 0.50% maximum for chromium, and 0.15% maximum for molybdenum.
- For each reduction of 0.01% below the specified maximum concetration for carbon, an increase of 0.05% above the specified maximum concentration for manganese is permissible, up to a maximum of 1.65%
- Unless otherwise agreed, the sum of the niobium and vanadium contents shall be ≤0.06%.
- The sum of the niobium ,vanadium and titanium concentratons shall be ≤0.06%.
- Unless otheriwse agreed.
- Unless otherwise agreed, the sum of niobium, vanadium and titanium concentrations shall be ≤ 0.15%
API 5L other PRODUCTS
Popular Product Searches on Rexal Tubes India:
API 5L PSL2 Pipes: X42 PSL2 Pipes | X46 PSL2 Pipes | X52 PSL2 Pipes | X56 PSL2 Pipes | X60 PSL2 Pipes | X65 PSL2 Pipes | X70 PSL2 Pipes | X80 PSL2 LSAW Steel Pipes | X80 PSL2 Seamless Pipes | X100 PSL2 Pipes | X120 PSL2 Pipes.
API 5L Seamless Pipes: Gr.B PSL1 Seamless Pipe | Gr.B PSL2 Seamless Pipe | X42 PSL1 Seamless Pipes | X42 PSL2 Seamless Pipes | X46 PSL1 Seamless Pipes | X46 PSL2 Seamless Pipes | X52 PSL1 Seamless Pipes | X52 PSL2 Seamless Pipes | X56 PSL1 Seamless Pipes | X56 PSL2 Seamless Pipes | X60 PSL1 Seamless Pipes | X60 PSL2 Seamless Pipes | X65 PSL1 Seamless Pipes | X65 PSL2 Seamless Pipes | API5L X70 PSL1 Seamless Pipes | X70 PSL2 Seamless Pipes | X100 Seamless Pipes | X120 Seamless Pipe.
API 5L DSAW Line Pipes: X42 PSL1 DSAW Pipes | X42 PSL2 DSAW Pipes | X46 PSL1 DSAW Pipes | X46 PSL2 DSAW Pipes | X52 PSL1 DSAW Pipes | X52 PSL2 DSAW Pipes | X56 PSL1 DSAW Pipes | X56 PSL2 DSAW Pipes | X60 PSL1 DSAW Pipes | X60 PSL2 DSAW Pipes | X65 PSL1 DSAW Pipes | X65 PSL2 DSAW Pipes | X70 PSL1 DSAW Pipes | X70 PSL2 DSAW Pipes | X80 DSAW Steel Pipes | X80 Seamless Steel Pipes | X100 DSAW Pipes | X120 DSAW Pipe.
API 5L LSAW Line Pipes: X42 PSL1 LSAW Pipes | X42 PSL2 LSAW Pipes | X46 PSL1 LSAW Pipes | X46 PSL2 LSAW Pipes | X52 PSL1 LSAW Pipes | X52 PSL2 LSAW Pipes | X56 PSL1 LSAW Pipes | X56 PSL2 LSAW Pipes | X60 PSL1 LSAW Pipes | X60 PSL2 LSAW Pipes | X65 PSL1 LSAW Pipes | X65 PSL2 LSAW Pipes | X70 PSL1 LSAW Pipes | X70 PSL2 LSAW Pipes