ASTM A860 WPHY 52 Fittings Elbow, A860 WPHY 52 Eccentric Reducer, A860 WPHY 52 Concentric Reducers, A860 WPHY 52 Reducing Tee, A860 WPHY 52 Equal Tee, A860 WPHY 52 End Cap
ASTM A860 WPHY 52 Fittings are one of the widely used grade for requirements in high tensile requirements. ASTM A860 WPHY 52 Fittings chemical composition includes metals like Manganese, aluminum, phosphorus, sulphur, vanadium, silicon, nickel, titanium, chromium, molybdenum, and copper. These metals amend the mechanical properties of the MSS SP75 WPHY 52. Amended ASTM A860 WPHY 52 Fittings mechanical properties include good tensile vigor and amended resistance to corrosion.
These fittings are heat-treated during their manufacture. The heat treatment could be heat-treated according to any of the ASTM A860 WPHY 52 Fittings designations by either quenching, tempering, normalizing, or stress assuaging.
Our ASTM A860 WPHY 52 Fittings, where the WPHY stands for Wrought Pipe High-Yield, are high in tensile vigor, are impervious to general corrosion and avail the fertilizer engendered units.
Industries utilize the elbow ASTM A860 WPHY 52 Fittings in their applications. For example, these fittings are utilized in or as marine or brine equipment, off-shore oil drilling companies, petrochemicals, gas processing, heat exchangers, pharmaceutical equipment, specialty chemicals, chemical equipment, power generation, condensers, pulp, and paper industries.
For the verbally expressed ASTM A860 WPHY 52 Fittings, the minimum yield vigor is about 52000 PSI. The high vigor material is a low alloy steel grade, designed to withstand high-stress situations like those optically discerned during the transmission of media across the oil and gas industry.
Fill the Below Detail
The chemical and mechanical requirements of ASTM A860 WPHY 52 Fittings are as below:
Chemical Analysis:
| C | Si | Mn | P | S | Cr | Ni | Mo | Cu | V | Al | Nb | Ti | - | CE | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Min. | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Max. | 0.20 | 0.45 | 1.60 | 0.030 | 0.010 | 0.300 | 0.300 | 0.250 | 0.30 0 | 0.10 0 | 0.06 0 | 0.040 | 0.010 | 0.43 |
Physical Analysis & Impact Test:
| 0.2 % / YS ( Mpa) | UTS* ( Mpa) | ELONGATION % ON GL 50 MM | HARDNESS IN BHN | IMPACT TEST (-46 Deg C ) | |||
|---|---|---|---|---|---|---|---|
| Specimen Size | OBS. VALUE IN (J) | AVG.(J) | |||||
| Min. | 360 | 455 | 25 | - | 27 J | 30J | |
| Max. | - | 625 | - | 220 | - | - | |
ASTM A860 WPHY 52 Fittings Specification:
Grade: ASTM A860 WPHY 52 Fittings
Standard: ASTMA860 MSS SP-75
WPHY 52 fittings Type: Seamless / Welded / Fabricated WPHY 52 fittings
Color: black
Dimensions: ANSI/ASME B16.9, B16.9, MSS-SP-75
Bending Radius : R=1D, 2D, 3D, 5D, 6D, 8D, 10D or Custom
Wall thickness: SCH10, SCH20, SCH30, STD, SCH40, SCH60, XS, SCH80, SCH100, SCH120, SCH140, SCH160, XXS available with NACE MR 01-75
WPHY 52 fittings Size Range: ½” NB to 120″ NB, Seamless ½” to 24”, Welded ½” to 120”, Two Joint / Two Halve Fittings 6” to 48”
WPHY 52 fittings Dimensions: ANSI/ASME B16.9, B16.28, MSS-SP-43.
MSS SP75 WPHY 52 Material: fittings, pipe fittings, Elbows, Tees, Reducers, and Caps
Fittings Technics: BUTT WELD /FOREGED FITTINGS
Fittings Surface treatment: sand blasting, Sand Rolling, Sand Blasting
Applicable Standards for WPHY 52 fitting: ASME B 16.9 for large Bore WPHY 52 fittings
ASME B 16.11 for small Bore WPHY 52 fittings (socket welded)
ASME B 16.25 for A860 WPHY 52 butt weld ends
ASME B 16.28 for small radius A860 WPHY 52 elbow
Types of ASTM A860 WPHY 52 Material : Tee, Equal Tee, Reducing Tee, Elbows, Long Radius Elbow, Short Radius Elbow, Bend, Long Radius Bends, Piggable Bends, Cross, Reducer, Concentric Reducer, Con Reducer, Ecc Reducer, Eccentric Reducer, Pipe End Caps
Fittings Application & uses: Petroleum, chemical, power, gas, metallurgy, shipbuilding, etc.
ASTM A860 WPHY 52 Elbow Fittings:
ASTM A860 WPHY 52 elbow manufacturer
API 5L X52 elbow/ bend size: Seamless: 1/2″-30″
Welded 52 Fittings: 12″-72″ (or as customer requirements)
API 5L X52 elbow/ bend degree: 45 deg, 90 deg
API 5L X52 elbow/ bend thickness: Schedule 10S, SCH 20, SCH 30, and SCH 40
API 5L X52 Fittings standard: ASME B16.9, MSS SP-75
ASTM A860 WPHY 52 Tee:
Manufacturer of ASTM A860 Carbon Steel Grade 52 welding reducing tee
Butt Welded Steel Tee
Carbon Steel Grade 52 Tee Fittings Size: 1/2″-72″DN15-DN1800
Tee Fittings Dimension Tolerance: ±12.5%
Tee Fittings Standard: ISO. ANSI. JIS. DIN GB/ T12459 GB/T13401 ASME B16.9
Carbon Steel Grade 52 Tee Fittings Packaging: Wooden Cases or wooden pallet or as per customers requirement
Tee Fittings Applications range: Petroleum, chemical, power, gas, metallurgy, shipbuilding, construction, etc.
ASTM A860WPHY 52 Eccentric Reducer/Concentric Reducer:
ASTM A860 WPHY 52 reducer manufacturer
WT: sch40/std/sch80/thick-wall
ASTM A860 WPHY 52 END CAP:
ASTM A860 Grade 52 Pipe Cap
Cap Pipe fittings
Fittings Standard: ANSI ASTM ASME JIS BS MSS DIN etc.
Fittings Size: 1/2’’~48’’ (Seamless); 16’’~72’’ (Welded)
Fittings Wall thickness: Sch5~Sch160\ XXS
Fittings Material: ASTM A860 Gr 52