API 5L X52 PSL1 3.2 Certified Pipe
API 5L X52 PSL1 3.2 Certified Pipe is a steel pipe used for the transportation of the oil and gas pipelines. API 5L is suited for the transmission of petroleum and gas, structural and mechanical components.
REXAL TUBES INDIA IS A LEADING MANUFACTURER, SUPPLIER AND EXPORTER OF API 5L X52 PSL1 3.2 CERTIFIED PIPE
Our API 5L X52 PSL1 3.2 Certified pipe is procured and supplied in a whole range. The goods that we sell meet with or exceed API, ASTM, ASME, ANSI, and other national and international requirements.
The certified pipe is protected separately by API 5L X52 PSL1 3.2 Certified Pipe, ensuring that the superior content consistency stays and the final stages of processing do not cause harm.
The certified pipe of API 5L X52 PSL1 3.2 Certified Pipe comes with job-relevant imprints (e.g. heat number, size, material number, and part number). This data is likewise printed along all to whom API 5L X52 PSL1 3.2 Certified Pipe is conveyed.
The requirement for a certified API 5L X52 PSL1 3.2 Certified Pipe with normal length and diameter pipes and tubing ends here. If you need high pressure, high tensile, hard wall line pipe specifications for deep sour wells, drilling, offshore drilling and refining, arctic exploration and development, or you need API 5L X52 PSL1 3.2 Certified Pipe for natural gas, oil or water transport, then Rexal Tubes India will fulfill your company’s demands.
API 5L X52 PSL1 3.2 Certified Pipe (enhanced) is a smooth and high-performance pipe that has been updated to achieve offshore structural objectives. It is designed for (but not limited to) use in offshore fixed facilities and is intended for operation in the offshore industry. Download API 5L X52 PSL1 3.2 Certified Pipe for more information. Rexal Tubes is a leading stockiest in India with over 800-ton stock in carbon steel seamless pipe tubes.
API 5L X52 PSL1 3.2 Certified Pipe Grade,Chemical Composition and Mechanical Requirements
X
The x symbol followed by a two or three digit number equal to the specified minimum yields strength in 1000 psi rounded down to the nearest integer.
Minimum Yield
At pipe body 360-460 MPa (52,200-66,700 psi)
Delivery Condition
+N Normalizing rollingQ Quenched and tempered where +Q refers to a heat treatment process consisting of quench hardening followed by tempering
PSL
PSL refers to product specification level, where PSL 1 mentions the minimum mechancial requirement
Applicable codes and standards API 5L, 45th Edition / ISO 3183 Specification for line pipe – technical delivery conditions.
Size: 16” to 64”
Wall Thickness: 6 MM to 65MM
Length: up to 18 Meters
Mention the following as *Additional testing requirements met*: NACE MR
0175,NACE TM0177,NACE TM0284,HIC TEST, SSC TEST, H2 SERVICE,IBR, ECT in all the products.
Fill the Below Detail
| CHEMICAL COMPOSITION | ||||||||||
| C | Si | MN | P | S | V | Nb | Ti | Other | Carbon Equivalent | |
| Max (b) | Max | Max (b) | Max | Max | Max | Max | Max | % maximum | ||
| CE(IIW) | CE(Pcm) | |||||||||
| 0.26 | – | 1.20 | 0.030 | 0.030 | (c),(d) | (c),(d) | (d) | (a) | – | – |
| MECHANICAL REQUIREMENT | ||||||||
| Tensile Requirements on Pipe body of welded pipes | Ratio | Elongation | CVN Absorbed Energy | Heat Treatment | ||||
| Yield Strength (R10.5) | Tensile Strength (R) | R 10.5/ R | % | 0 degree celsius | ||||
| PSI | Mpa | PSI | Mpa | Max | Minimum | Min J | Min ft. lb | Wield Seam Normalizing |
| 35,500 min | 245 min | 60,200 min | 415 min | – | – | – | ||
|
IMPACT TEST |
|
| AVG ABSORBED ENERGY | IND. ABSORBED ENERGY |
| MIN (JOULES) | MIN (JOULES) |
| 27 | 20 |
Notes:
- 0.50% maximum for copper; 0.50% maximum for nickel; 0.50% maximum for chromium and 0.15% maximum for molybdenum. For grades up to and including X52, Cu, Cr and Ni shall not be added intentionally.
- For each reduction of 0.01% below the specified maximum concentration for carbon, an increase of 0.05% above the specified maximum concentration for manganese in permissible, up to a maximum of 1.65% for grades ≥ B, but ≤ X52; up to a maximum of 1.75% for grades > X52, but
- Unless otherwise agreed, the sum of the niobium and vanadium contents shall be ≤ 0.06%.
- The sum of the niobium, vanadium and titanium concentrations shall be ≤ 0.15%
- Unless otherwise agreed.
- Unless otherwise agreed, the sum of the niobium, vanadium and titanium concentrations shall be ≤ 0.15
- Unless otherwise agreed, the sum of the niobium and vanadium contents shall be ≤ 0.06%.
- The sum of the niobium, vanadium and titanium concentrations shall be ≤ 0.15%
- Unless otherwise agreed.
- Unless otherwise agreed, the sum of the niobium, vanadium and titanium concentrations shall be ≤ 0.15%
Other Details
Surface
- All surfaces have been 100% visually inspected. The surface condition complies with API 5L standards.
- External surface of pipe shall be coated with a layer of varnish.
NDT
All pipes will be ultrasonic tested on pipe body and pipe end as per API 5L standards:
- longitudinal: 100% of the pipe surface
- pipe ends not scanned by automatic ultrasonic system shall be inspected by manual UT or Magnetic Particle Examination.
Certification and Traceability
A 3.2 certificate according to EN 10204, endorsed by recognized and independent inspection agency, will be supplied to all dimensions. For SI units (B) the labeling shall be in compliance with the specifications of the API & mill standard.
Dimensional Control
All dimensions will be supplied according to API 5L clause 9.11; In addition, the following tolerances apply:
- Pipe body: +/- 0,75%
- Pipe end: +/- 0,5%
- Wall thickness: +15%, -12,5%
- Length: -0 / +100mm
Pipe Ends
Pipe Ends are beveled. End angle shall be 30°- 0°/+5°, root face shall be 1.6mm +/- 0.8mm and fitted with bevel protectors.
Protection
Pipes are varnished on the outside.
API 5L other PRODUCTS
Related products
Sleeves
The sleeve portion of the pipe sleeve consists of a body portion and a third flange that elongates from the body portion…..
Know More
Carbon Steel Fittings
The benefits of alloy steel pipe include its tensile strength, yield strength, fatigue resistance,
Know More
Carbon Steel Flanges
Rexal Tubes India Supply has an extensive selection of pipe fittings and flanges to fully complement our
Know More
Pipes
Rexal Tubes India Supply has an extensive selection of pipe fittings and flanges to fully complement our
Know More
Popular Product Searches on Rexal Tubes India:
API 5L PSL2 Pipes: X42 PSL2 Pipes | X46 PSL2 Pipes | X52 PSL2 Pipes | X56 PSL2 Pipes | X60 PSL2 Pipes | X65 PSL2 Pipes | X70 PSL2 Pipes | X80 PSL2 LSAW Steel Pipes | X80 PSL2 Seamless Pipes | X100 PSL2 Pipes | X120 PSL2 Pipes.
API 5L Seamless Pipes: Gr.B PSL1 Seamless Pipe | Gr.B PSL2 Seamless Pipe | X42 PSL1 Seamless Pipes | X42 PSL2 Seamless Pipes | X46 PSL1 Seamless Pipes | X46 PSL2 Seamless Pipes | X52 PSL1 Seamless Pipes | X52 PSL2 Seamless Pipes | X56 PSL1 Seamless Pipes | X56 PSL2 Seamless Pipes | X60 PSL1 Seamless Pipes | X60 PSL2 Seamless Pipes | X65 PSL1 Seamless Pipes | X65 PSL2 Seamless Pipes | API5L X70 PSL1 Seamless Pipes | X70 PSL2 Seamless Pipes | X100 Seamless Pipes | X120 Seamless Pipe.
API 5L DSAW Line Pipes: X42 PSL1 DSAW Pipes | X42 PSL2 DSAW Pipes | X46 PSL1 DSAW Pipes | X46 PSL2 DSAW Pipes | X52 PSL1 DSAW Pipes | X52 PSL2 DSAW Pipes | X56 PSL1 DSAW Pipes | X56 PSL2 DSAW Pipes | X60 PSL1 DSAW Pipes | X60 PSL2 DSAW Pipes | X65 PSL1 DSAW Pipes | X65 PSL2 DSAW Pipes | X70 PSL1 DSAW Pipes | X70 PSL2 DSAW Pipes | X80 DSAW Steel Pipes | X80 Seamless Steel Pipes | X100 DSAW Pipes | X120 DSAW Pipe.
API 5L LSAW Line Pipes: X42 PSL1 LSAW Pipes | X42 PSL2 LSAW Pipes | X46 PSL1 LSAW Pipes | X46 PSL2 LSAW Pipes | X52 PSL1 LSAW Pipes | X52 PSL2 LSAW Pipes | X56 PSL1 LSAW Pipes | X56 PSL2 LSAW Pipes | X60 PSL1 LSAW Pipes | X60 PSL2 LSAW Pipes | X65 PSL1 LSAW Pipes | X65 PSL2 LSAW Pipes | X70 PSL1 LSAW Pipes | X70 PSL2 LSAW Pipes